Skip to main content
Post your resume and find your next job on Indeed!

Engineer jobs in Kamloops, BC

Sort by: -
    • We are seeking a dedicated Reliability Engineer to focus on long-term monthly and quarterly issues.
    • This role involves analyzing historical data from the CMMS…
    • Mentoring junior engineers and contributing to continuous improvement of engineering tools.
    • We are specifically seeking engineers with direct water and…
    • Provide engineer communications on the battlefield.
    • Have completed at least Grade 10 or Secondary IV in Québec (some jobs need higher levels of education).
    • Demonstrated ability to provide technical leadership and mentor engineers.
    • Mentor engineers across experience levels, providing coaching in testing strategies,…
    • 5 days on 2 days off - initially remote/hybrid and transitioning to site near Princeton, BC.
    • Full-time on-site during construction.
    • Position:* Aircraft Maintenance Engineer( M1/M2) – Resident or Rotational Shift available.
    • Schedule:* 14-days on / 14-days off (12-hour shifts) OR 24/7 rotating…
    • Norpac Construction Incorporated* is an independent geotechnical contractor operating across British Columbia and Alberta, specializing in slope stabilization…
    • The Transload Operator is responsible for providing safe and efficient truck loading and railcar unloading various products and commodities.
    • Hours of work: Full-time (37.5 hrs/wk) Flexible Work Role: Hybrid.
    • Provide engineering support for complex and smart (SMI) revenue meters throughout their…
    • Through your deep product knowledge of process optimization, work management tools, and automated workflows, you will help to improve the way our customers work…
    • Hours of work: Full-time (37.5 hrs/wk) Flexible Work Role: Hybrid.
    • This Specialist role is essential for developing and implementing strategic asset management…
    • Hours of work: Full-time (37.5 hrs/wk) Flexible Work Role: Hybrid.
    • Than 300 BC Hydro substations, i.e. providing planning and engineering expertise, developing…
    • Hours of work: Full-time (37.5 hrs/wk) Flexible Work Role: Hybrid.
    • Cycle value of the assets and initiating programs/projects to implement the plans.
    • At the intermediate level, the Requirements Engineer applies established processes and tools to deliver high‑quality requirements while collaborating closely…
    • Mentor junior QA engineers and promote automation best practices across teams.
    • Automation Engineer with experience in Playwright responsible for designing,…
Get email updates for the latest Engineer jobs in Kamloops, BC

By creating a job alert, you agree to our Terms . You can change your consent settings at any time by unsubscribing or as detailed in our terms.

People also searched:

project manager
engineer in training
engineering
quality

Career Resources:

Job Post Details

Reliability Engineer - job post

Confidential
British Columbia
$85,000–$113,000 a year - Permanent, Full-time

Job details

Pay

  • $85,000–$113,000 a year

Job type

  • Permanent
  • Full-time

Location

British Columbia

Benefits

Pulled from the full job description

  • Tuition reimbursement
  • Paid time off
  • Vision care
  • Dental care
  • Relocation assistance
  • Life insurance
  • Employee assistance program

Full job description

We are seeking a dedicated Reliability Engineer to focus on long-term monthly and quarterly issues. This role involves analyzing historical data from the CMMS and Production Loss System to prioritize and deliver the highest value reliability improvements.

Benefits

  • Competitive salary: $85,000 - $113,000
  • Health Insurance (includes Virtual Health, and HCSA), Dental Insurance, Vision Insurance
  • Life Insurance, Long-term Disability, Short-term Disability
  • RRSP Match
  • Employee Assistance Program
  • Awards and Recognition
  • Tuition reimbursement
  • Employee Perks & Discounts

Job Responsibilities

  • Collaborate to design, develop, and implement corporate preventative and predictive maintenance systems using IBM Maximo.
  • Implement and optimize cost-justified Predictive and Preventative Maintenance Strategies and Reliability Best Practices at the plant
  • Provide necessary CMMS related training to end users, adhering to the Maximo SOP.
  • Continuously improve the Electrical and Mechanical Preventative Maintenance system to enhance safety, product quality, production efficiency, and labor/material effectiveness.
  • Analyze production losses due to downtime, rate reduction, and waste of critical equipment to prioritize Root Cause Analysis efforts.
  • Review downtime data to identify trends and recurring failures, aiding in root cause identification.
  • Facilitate RCM, using FMECA’s to assess criticality ranking of existing failure modes, identify and design out the root causes of defects and develop predictive and preventive strategies to reduce impact or detect defects early enough to correct before an unplanned failure.
  • Assess and optimize the spare parts required to support the critical PM tasks developed from RCM.
  • Evaluate and justify new technologies or inspection procedures to replace current instrumentation controls, sensors, drives, and other electrical components and inspection strategies.
  • Other related reliability and maintenance responsibilities.

Qualifications

  • University degree in Engineering (preferably in Electrical, Mechanical or Reliability
  • Engineering)
  • Minimum 5 years of experience in process manufacturing or industrial equipment design environments (Preferably with Maintenance)
  • Understanding electrical standards such as: IEEE, National Electric Code, NEMA, etc. is an asset
  • Proficiency in MS Excel, AutoCAD, and CMMS (Maximo would be an asset)
  • Familiar with the Workflow from service requests to the final close out of Work Orders
  • Experience with plant planning and scheduling, shutdown procedures and best practices
  • Previously developed PM, PdM strategies and Best Practices for high speed manufacturing equipment
  • Worked with condition monitoring equipment such as: vibration analysis, ultrasonic lube, belt tensioners, etc. As well as precision installation tools such as: Laser alignment, sonic belt tensioners, etc.

Job Types: Full-time, Permanent

Pay: $85,000.00-$113,000.00 per year

Benefits:

  • Dental care
  • Disability insurance
  • Extended health care
  • Life insurance
  • On-site parking
  • Paid time off
  • Relocation assistance
  • RRSP match
  • Store discount
  • Tuition reimbursement
  • Vision care
  • Wellness program

Ability to commute/relocate:

  • British Columbia: reliably commute or be willing to relocate with an employer-provided relocation package (required)

Education:

  • Bachelor's Degree (required)

Experience:

  • manufacturing or industrial equipment design environments: 5 years (required)

Work Location: In person

Let Employers Find YouUpload Your Resume