Skip to main content
Post your resume and find your next job on Indeed!

Bc Hydro Power System Engineer jobs

Sort by: -
    • Powertech's Engineering Service Business Unit focuses on power system software development, power system and.
    • Software platforms for dynamic security assessment…
    • Hours of work: Full-time (37.5 hrs/wk) Flexible Work Role: Hybrid.
    • Annual salary: 1,792.24 bi-weekly.
    • This is a full time (37.5) 16-week paid job shadow…
    • Develop, maintain, optimize, design, and manage the industrial process control system such as PLC, DCS systems, OT networking and cyber security, and…
    • In accordance with the established mission, vision, values, and strategic priorities of Northern Health, and under the general supervision of Manager or…
    • Collaborate closely with signals, communications, traction power, SCADA, and other rail systems specialists.
    • Familiarity with rail systems such as signalling,…
    • The activities of a group of engineers and technical support staff.
    • Competitive salary and comprehensive benefits package.
  • View similar jobs with this employer
    • The employee will be responsible for the design and coordination of electrical systems for hydro speed governor.
    • Baccalauréat (université) en génie électrique.
    • Must be flexible to work 12 hour shifts.
    • Must hold a valid class 3 boiler license.
    • Effective written and oral communications skills.
    • Developing and maintaining a deep technical understanding of site‑specific electrical equipment and systems.
    • We are looking for a Senior Electrical Engineer to…
    • Knowledge of systems where asset condition records are found would be an asset.
    • Working knowledge in application and use of business systems including but not…
    • Gas transmission and distribution systems and system capacity assessments servicing multiple system needs.
    • Develop, maintain and use calibrated, natural gas…
    • Experience with power system simulation software such as CYMDIST and EMTP-RV;
    • Engineers, designers, system operators, and field personnel;
    • Technologies that support system reliability and modernization.
    • Be considered for junior roles including engineers in training.
    • Cable hydraulic systems design and testing.
    • Transmission cable system design, installation, and maintenance.
    • Support and mentor junior engineers and contribute…
    • Supporting regional distribution systems through engineering studies, investigations, and system assessments related to.
    • A minimum of 15 paid vacation days.
Get e-mail updates for the latest Bc Hydro Power System Engineer jobs

By creating a job alert, you agree to our Terms . You can change your consent settings at any time by unsubscribing or as detailed in our terms.

People also searched:

full time
government
hydro one
hydro quebec
hydro quebec emploi
junior engineer
mechanical engineer
part time
process engineer
project manager

Career Resources:

Job Post Details

Power System Study Engineer - job post

BC Hydro
3.9 out of 5 stars
Lower Mainland, BC•Hybrid work
$89,910–$113,730 a year - Permanent, Full-time
You must create an Indeed account before continuing to the company website to apply

Job details

Pay

  • $89,910–$113,730 a year

Job type

  • Permanent
  • Full-time

Location

Lower Mainland, BC•Hybrid work

Full job description

A workplace powered by you

Powertech Labs Inc is a cleantech company with the mission of being a trusted innovation partner providing solutions,
specialised testing, and technical expertise for a safe and sustainable global energy future. Powertech has a global
reputation for delivering transformative solutions in both the electric power industry as well as the transport sector. A clean
future will be driven by electric and hydrogen power, and we will help get there.

We are always guided by our values as a global clean-technology and engineering company:
  • Safety: This top everything. We do our work safely or we do not do it at all.
  • Challenges: We ready ourselves for the hardest challenges – through attaining accreditations, developing industry-
leading innovative products & services, investing in our labs, hiring great people, and making them better.
  • Diverse Teams: We are strongest together and capitalize on our varied attributes – together we are more than the
sum of parts.
  • Our Customers: Customers fuel this company and we constantly work with them to earn and retain their trust and
loyalty. We expect that our customers hold us accountable to our commitments.
  • Excellence: Striving for excellence, acting with integrity, and having the highest standards in quality are core to
what we do.

Power System Study Engineer

Number of positions: 2 Job Location:

Employment type: Permanent Region: Lower Mainland

Hours of work: Full-time (37.5 hrs/wk) Flexible Work Role: Hybrid

Annual salary: $89,910 - $113,730

What you'll do

Powertech's Engineering Service Business Unit focuses on power system software development, power system and
substation consulting studies and compliance testing services for electric utilities and other clients in power industry. We are
the vendor of the cutting-edge power system analysis software package, DSATools™, recognized globally as leading-edge
software platforms for dynamic security assessment of complex power systems for both off-line (system planning) and on-
line applications (near-real-time operation).

Powertech provides a full spectrum of study services from fast electromagnetic transient switching studies, power system
planning and operation studies (including transient, small-signal, voltage, and frequency stabilities), post-mortem
investigation of system disturbances and events, generation and load interconnection studies, generator including wind and
solar renewables, and load model development or validation via field testing, and to NERC compliance studies (e.g., TPL,
FAC, PRC, MOD, CIP, etc.).

In this role, the successful candidate will take on the following key responsibilities:
  • Perform power flow, short-circuit, contingency, transfer, and stability studies, including transient, small-signal, voltage, and
frequency stability assessments.

  • Conduct bulk power system studies using industry-standard software tools.

  • Carry out advanced and specialized studies using tools such as PSS®E, DSATools, and PSCAD.

  • Support and contribute to model development, including generation, load, transmission, and transformer modeling.

  • Develop and recommend system upgrade strategies and mitigation plans to address system constraints and reliability
issues.

  • Establish, review, and enhance transmission planning and study methodologies and processes.

  • Prepare technical study reports, including model validation reports required for regulatory compliance.

  • Present study results and reports to clients.

  • Assist with proposal development in response to requests for proposals (RFPs) and help define scopes of work to meet
client needs.

  • Participate in the development and testing of new software releases.

What you bring

  • Masters or PhD in Electrical Engineering from a recognized university with a focus on Power Systems including Power
systems analysis, Modeling techniques, and computational algorithms. Equivalent combinations of education and
experience may also be considered.

  • At the senior level, at least 8 years of experience in electrical engineering is required, with expertise in power system
planning and operational studies, power system research, software development for power system analysis, and customer
support.
New graduates with an interest in power system analysis and simulation and eligible for immedaiate registration as EITs are
encouraged to apply.

  • Strong understanding of power system studies, including stability, fault analysis, and EMT simulations.
  • Registered as a Professional Engineer with Engineers and Geoscientists BC (EGBC).

The following skills, abilities, and competencies are associated with success in this role:
  • Solid knowledge of power system modeling and analytical methods, including steady-state studies (power flow,
contingency, and voltage stability), short-circuit analysis, and transient and small-signal stability studies in both time and
frequency domains.
  • Strong understanding of generator and renewable resource modeling, power system and/or substation protection, and the
control systems of synchronous generators, renewable resources, and FACTS devices.
  • General knowledge of power system operations, protection, grid voltage and frequency control, and applicable reliability
standards.
  • Proficiency in power system simulation software such as DSATools, PSS®E, PSCAD, or DIgSILENT is considered an
asset.
  • Experience programming in one or more languages, such as Python, MATLAB, or C/C++.

In addition, the following competencies are desirable:
  • Strong verbal and written communication skills, with the ability to communicate effectively with diverse audiences and
stakeholders.
  • Ability to listen actively and foster open dialogue with project team members.
  • Strong commitment to safety and quality.
  • Ability to work both independently and collaboratively while demonstrating a high standard of professionalism.


What we offer

Job Status: Full-Time Regular
Job Affiliation: M&P

We welcome applications from new graduates and experienced study engineers and transmission planners. Candidates will
be assessed and hired as an EIT, Engineer 2 or Senior Engineer depending on qualifications and relevant modeling and
study experience. The salary range for each successful candidate will depend on the level the individual is assessed at.
Applicants will be evaluated based on current status with EGBC,years of experience, relevancy and quality of experience,
as well as their core competencies. Internationally-trained engineers may be considered if eligible for EGBC registration.

Applicants must be legally authorized to work in Canada. Remote work may be considered for more senior candidates and
the hiring team will discuss potential arrangements during the selection process.

Please be advised that this role has been assessed as safety sensitive and pre-qualification alcohol and drug testing will be
required as a pre-condition to employment.


What else you should know

Powertech Labs is an equal opportunity employer. We include everyone. We welcome applications from anyone, including
members of visible minorities, women, Indigenous peoples, persons with disabilities, persons of minority sexual orientations
and gender identities, and others with the skills and knowledge to productively engage with diverse communities. We are
also happy to provide reasonable accommodations throughout the selection process and while working at Powertech Labs.

Maintaining customer-confidence and our reputation is key: To this end, all our campus and laboratories are accredited to
ISO9001 (quality), ISO14001 (environment stewardship) and ISO45001 (safety) and IEC/ISO 17025 for over 100 standards.
To complement the focus on accreditation, we encourage our experts to drive global standards and provide development
opportunities for all staff to grow in their role and to advance in their careers.

Working at Powertech is not a job but a career. If you want to be a part of a growing clean technology company that is
impactful and working towards a common goal of accelerating the world towards a net zero carbon future, come and join
our team.

Date Posted: 2026-06-08 Closing Date: 2026-06-21

For internal use 52446600

Let Employers Find YouUpload Your Resume