Skip to main content
Post your resume and find your next job on Indeed!

Electronic Design Engineer jobs

Sort by: -
    • Help establish design goals, process and equipment specifications for Controls and Electrical power distribution systems.
    • Electrical design: 2 years (preferred).
    • Thorough knowledge of design procedures, specifications, and engineering software.
    • Job Types: Full-time, Permanent.
    • Familiarity with IP network design.
    • Prepare design drawings such as architecture diagrams, layouts, wiring diagrams, calculations, BOM, cable schedules, and RF…
  • View similar jobs with this employer
    • Mentor and guide junior engineers while promoting quality, collaboration, and engineering best practices.
    • Drive layout reviews, layout verification, and design…
    • Lead the design, prototyping, and development of electronic hardware products and sub-assemblies.
    • The successful candidate will have strong experience in PCB…
    • HW design: 5 years (required).
    • High-level / architectural system and board design.
    • Low-level, mixed-signal circuit design.
    • Job Types: Full-time, Permanent.
    • Experience leading / coordinating design individuals across multiple projects.
    • O Equipment cabinet/enclosure/junction box design.
    • Eligible to work in Canada.
    • Develop detailed design specifications and project scoping documents in coordination with Product Category Managers for new designs.
    • We are looking for an engineer who combines deep knowledge of digital and analog design with a systems-thinking mindset—someone who understands not just how to…
  • View similar jobs with this employer
    • Chez Distech Controls, on ne se contente pas de créer des produits : on conçoit des solutions qui rendent les bâtiments plus intelligents, plus confortables…
  • View similar jobs with this employer
    • Chez Distech Controls, on ne se contente pas de créer des produits : on conçoit des solutions qui rendent les bâtiments plus intelligents, plus confortables…
  • View similar jobs with this employer
    • Chez Distech Controls, on ne se contente pas de créer des produits : on conçoit des solutions qui rendent les bâtiments plus intelligents, plus confortables…
    • Investigate electrical or electronic failures.
    • Prepare engineering designs and drawings.
    • Implement system design improvements to enhance efficiency and safety.
    • Demonstrated process control and automation design know-how.
    • Prepare plans, specifications, and technical documents that meet specifications set during…
    • Mentor intermediate engineers and strengthen the design practices, reviews, and standards the team relies on.
    • Take designs from innovative ideas all the way to…
Get e-mail updates for the latest Electronic Design Engineer jobs

By creating a job alert, you agree to our Terms . You can change your consent settings at any time by unsubscribing or as detailed in our terms.

Career Resources:

Job Post Details

Piston Automotive logo

Controls Engineer - job post

Piston Automotive
3.3 out of 5 stars
350 Hazelhurst Road, Mississauga, ON L5J 4T8
$80,000–$100,000 a year - Full-time
You must create an Indeed account before continuing to the company website to apply

Job details

Pay

  • $80,000–$100,000 a year

Job type

  • Full-time

Location

350 Hazelhurst Road, Mississauga, ON L5J 4T8

Benefits

Pulled from the full job description

  • Vision care
  • Designated paid holidays

Full job description

Overview:
The Controls Engineer is responsible for creating, documenting, developing, supporting and improving upon the control systems that are essential to the production processes. Involvement will range from initial project sourcing all the way through SOP +90 days, or as required for corporate employees or launch through EOP plant employees. Both may be required to support implementation of engineering changes for current production products. You will provide your controls expertise to help in tooling design and automation for new projects and process changes driven by product engineering changes. Additionally, responsible for the transfer of all equipment and process documentation to the Production Plant prior to SOP; this includes all OEM equipment documentation (electronic and hard copies of manuals, BOM, drawings, recommended spare parts and recommended PM's). Participating in the development of RFQ's and Equipment Specifications for Capital and Tooling Requirements. Responsible for programming torque control systems and joint development. Selection of error and mistake proofing devices. Supports Engineering Cost Estimator to supply quoted assumptions for the assembly process requirements, capital / tooling investments and direct / indirect labor. Help establish design goals, process and equipment specifications for Controls and Electrical power distribution systems.

Piston Automotive wasn’t just founded to make things. It was founded to make things better. And that begins with building better teams solely dedicated to achieving excellence at every level of execution through a combination of experience, expertise, and a deep seeded passion for what we do. Our assemblies consistently set the standard because our people consistently raise the bar.

Why Piston Automotive?
Competitive Wages, Paid Holidays & Vacation, Medical & Rx Plans, Dental & Vision Plans.
Responsibilities:
  • Analyze and calculate machine performance and requirements utilizing the PLC.
  • Responsible for the planning, coordination, and implementation and tracking of assigned projects.
  • Develop and track capital investment budgets for assigned projects.
  • Main interface with automation and capital equipment vendors for control solutions.
  • Provide controls guidance in equipment selection, overall operations and future expansion.
  • Integrating and networking PC's and PLC's (TCP/IP, EthernetIP)
  • Provide support for Controls related issues, as required, to prevent or minimize production downtime.
  • Drive lean concepts (5S, OEE, Kanban, Visual Factory, TPM etc.) throughout the organization.
  • Implement process improvements to improve overall efficiencies, including automation.
  • Collaborate on all controls related communication internally and externally, including technical presentation, design reviews, capacity analysis, and feasibility studies.
  • Supports Purchasing in evaluation of new suppliers, products and technologies to help maintain a competitive edge in the industry.
  • Benchmarking processes and equipment throughout the industry and incorporating into Piston Standards.
  • Provide guidance to Maintenance Technicians helping develop skillsets and strengthen the team.
  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Qualifications:
  • A minimum of 2 years of experience as a Controls Engineer or Maintenance Technician.
  • Bachelor's degree (B. A.) in Engineering, Programming
  • 2-4 years of experience in PLC programming (Allen Bradley Micro Logic, SLC 500's, ControlLogix 5000 processors) for Manual Assembly Cells, Automated Assembly Cells and Power & Free conveyor systems.
  • A minimum of 2-4 years programming of Vision Systems (Cognex, DVT, Keyence)
  • 2-4 years of experience HMI programming (AB PanelView and PanelView Plus)
  • A minimum of 2 years of experience in JIT, SPD, ILVS and Batch manufacturing systems. Including broadcast analysis from customer trigger through customer installation.
  • 2 years of experience with Manual and Automated Assembly Systems and Technologies, including both mechanical and control systems.
  • A minimum of 2 years of technical experience required (Microsoft Word, Excel, Project, Power Point, AutoCAD, RSLogix 5000, RSLogix 500, RS View, ex.).

Salary - $80,000-$100,000 CAD

Piston Automotive, part of the Piston Group family of companies, is an equal opportunity employer, dedicated to fostering a diverse and inclusive workplace that values the unique contributions of every employee. We encourage all candidates to apply for positions that match their skills and capabilities, ensuring equal consideration without discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. For any questions regarding job opportunities or the application process, please reach out to us at pistongrouptalent@pistongroup.com. We are committed to providing accommodations for individuals with disabilities during the job search and application process, reinforcing our commitment to inclusivity for all job seekers.
Let Employers Find YouUpload Your Resume